Amaco Tools

Sun Themed Push Mold

12342R

Maureen Carlson, nationally-known polymer clay artist, author, and teacher, created this series of themed push molds for Amaco . Each mold makes a variety of faces PLUS themed words relating to the faces. They are ideal for creating & /decorating.

Made of a strong, yet flexible rubber, the Designer Push Molds offer excellent detail, are easier to use, and work with a variety of materials including polymer clays, plaster of paris, air-dry modeling clays, craft soap, and candle wax. 
To use these molds, simply: 
1. Press or fill mold cavity with the desired material.
2. Allow to cool or dry if necessary.
3. Flex mold to release shapes

This package contains one 3-1/2x4-1/2 inch Silicone mold

 


Moon Themed Push Mold

12314p

Maureen Carlson, nationally-known polymer clay artist, author, and teacher, created this series of themed push molds for Amaco.

Each mold makes a variety of faces PLUS themed words relating to the faces. They are ideal for creating & /decorating.

Made of a strong, yet flexible rubber, the Designer Push MoldsTM offer excellent detail, are easier to use, and work with a variety of materials including polymer clays, plaster of paris, air-dry modeling clays, craft soap, and candle wax.

To use these molds, simply:

1. Press or fill mold cavity with the desired material.

2. Allow to cool or dry if necessary.

3. Flex mold to release shapes.

The four mold themes are: Sun, Moon, Victorian and Tribal.


Tri-Bead Roller

12489v

Making your own beads has NEVER been easier! This tool makes round, oval, and bicone beads in three easy steps:
1. Soften clay then measure using the supplied ring.
2. Roll softened clay into a ball and place into one of the channels in the base.
3. Place over base and slide back and forth.

In no time you'll be making several beads at once!

Professional System Bead Rollers Set 6

12511b

This bead roller makes a 36mm x 18mm oval bead.It also includes pin path holes and bead piercing pins for use with the AMACO Bead Baking Rack. By inserting the pin through the roller and the beads, they can be lifted out and placed into the slot on the Bead Baking Rack.

 


Round/Oval Bead Roller Set

12531c

NEW!This bead roller makes 13, 16, and 18mm round beads plus 13 and 18mm oval beads.

 


Bead Baking Rack

12529A

This handy tool makes baking polymer clay beads easier than ever before. After rolling beads, pierce with one of the supplied piercing pins then place pin into one pair of notches to suspend beads for baking.
Flat items can also be baked below beads on rack base at the same time if desired and it can also be used as a cane slicer!
The ends of the aluminum frame can be used as guides for clay blades to make straight cuts through a cane. Place the cane on the clear work surface provided and slide outward away from the end of the frame. Hold cane with one finger against the side wall and guide blade down through cane with the other hand. 45 degree angle slots in the sides of the frame can be used as a guide for your blade to make 45 degree angle cuts.The Bead Baking Rack is made of heavy-duty aluminum to withstand many uses and includes handles to remove it easily from the oven.

Polymer Clay Oven

12505p

This handy counter top polymer clay oven is perfect for warming or baking polymer clays or any craft product requiring heat up to 300 degrees (149 degrees C).

It includes a 30-minute timer to prevent over-baking and instruction book.
The Polymer Clay Oven is a much more efficient way to bake polymer clay than the energy used by a home oven.
Capacity is 540 cu. in. and it operates on standard household current.
Outside dimensions:15" wide x 7" high x 8" deep. Inside dimensions: 11" wide x 5" high (tray to top) x 7 1/2" deep
IMPORTANT: DO NOT put craft items in a cold oven. Always preheat oven. Polymer clay, as well as other craft products that require heat, cure best when baked in a properly preheated oven. Place an oven thermometer inside the polymer clay oven. Preheat by turning the temperature dial to 265 degrees and the timer dial to 20 MINUTES. When the bell rings indicating the oven is preheated, check the oven thermometer to verify that the oven is at the correct temperature. Place craft project(s) onto an index card or larger piece of card stock. Place all onto the wire rack and close the door.